A35 Stem (35.0) 50mm Orange

This A35 stem is crafted from 7075 domestically sourced aluminum. It's machined, anodized, and assembled in North Carolina. It features an 180 - degree clamp wrap secured by high - strength 316 stainless steel M5 bolts. The 32mm model has a stack height of 42mm, while the 40mm and 50mm models have a 40mm stack height. Note that there may be color variations during anodization compared to the colors on our site. It weighs between 128 - 150g including the stainless steel bolts. You can change the stem's look with colored faceplates using XN718*-7191. Technical specs include a 1 - 1/8' steerer diameter, 35.0mm bar diameter, +/-7 deg rise, 50mm length, and an orange color.

Using your A35 stem is straightforward. First, make sure your bike's steerer tube and handlebar have the correct diameters (1 - 1/8' and 35.0mm respectively). Then, attach the stem to the steerer tube using the high - strength 316 stainless steel M5 bolts, and connect the handlebar to the stem. You can adjust the rise within +/-7 degrees to fit your riding style. When it comes to maintenance, regularly check the tightness of the bolts to ensure safety. Clean the stem with a mild soap and water solution to keep it looking good. Also, be aware that due to the anodization process, there might be slight color differences between batches. And if you want to change the look of your stem, you can use the colored faceplates (XN718*-7191) for a fresh appearance.