29mm (DUB) Bike Bearing Extractor Set

This bike bearing extractor set is a must - have for bike maintenance. It can remove sealed bearings with an inner diameter ranging from 8mm to 30mm. Simply insert the extractor into the bearing, use an Allen key to tighten one side, and the collet will expand to firmly grip the bearing's inner side. Then, you can easily tap it out with a punch.

Using this bike bearing extractor set is easy. First, find the sealed bearing you want to remove, which should have an inner diameter between 8mm and 30mm. Insert the extractor into the bearing. Next, use an Allen key to tighten one side of the extractor. This will make the collet expand and hold the inside of the bearing tightly. After that, take a punch and gently tap the extractor out. When using this tool, make sure to use the right - sized Allen key to avoid damage. Also, don't use too much force when tapping with the punch to prevent the bearing from cracking. To keep this extractor set in good condition, clean it after each use and store it in a dry place.