Components Gnarwolf Chain Guide Rev2 Braze-On Black

The Gnarwolf Chain Guide Rev2 is an amazing upgrade for your bike. It comes with a newly designed head shape and a lower price. You can make infinite chainline adjustments between 48mm and 55mm using an elliptical expanding mandrel, and no shims are needed. For vertical adjustment, it works for 28t - 36t round rings (28t - 34t elliptical). Loosen a single screw to flip the guide aside, making chain removal a breeze without losing any settings. All adjustments are done with a common 4 mm hex key. Engineered for Enduro, heavy - trail, mud, and DH riding, it's incredibly stiff, strong, and light at just 44g. Its specific shape is optimized for elliptical/oval and round chainrings. Designed and made in Minneapolis, MN USA. Tech specs: Model - GnarWolf V2, Range - 28 - 34t, Mount - braze - on, Color - black.

Using the Gnarwolf Chain Guide Rev2 is easy. First, install it on your bike according to the braze - on mount. You can adjust the chainline by turning the elliptical expanding mandrel to get it between 48mm and 55mm. For vertical adjustment, set it according to your chainring size (28t - 36t round or 28t - 34t elliptical). When you need to remove the chain, just loosen one screw and flip the guide out of the way. Remember to use a 4 mm hex key for all adjustments. Keep it clean after rides, especially if you've been in mud. You can use a gentle bike cleaner and a soft brush. Check the screws regularly to make sure they're tight, but don't overtighten them. This will keep your chain guide working well for a long time.