Button Blinky Front and Rear Bike Light Set

This front and rear bike light set is a must - have for cyclists aiming for safety. It comes with two high - output surface - mounted LEDs, offering both steady and flashing modes to keep you highly visible on the road. With 160 degrees of wide - angle visibility, you'll be seen from multiple directions. It's water - resistant up to the IPX3 standard, so light rain won't stop you. Each light runs on a single included CR2032 battery. You can easily mount it using the rubber stretch strap. The front light has 15 lumens, while the rear one has 4 lumens. And it's non - rechargeable, weighing 18 + 18 g in total.

Using this bike light set is a breeze. First, take out the lights and the included CR2032 batteries. Open the battery compartment on each light and insert the battery. Make sure the polarity is correct. Then, find a suitable spot on your bike's front and rear. Wrap the rubber stretch strap around the part of the bike and secure the light in place. You can switch between the steady and flashing modes according to your needs. When you're done cycling, remove the lights to prevent accidental activation and battery drain. As for maintenance, keep the lights dry. If they get wet, dry them with a soft cloth. Avoid using harsh chemicals to clean them. Check the batteries regularly and replace them when the light starts to dim. This way, your bike light set will serve you well for a long time.