A318 Stem (31.8) 50mm Pink

Our A318 stem is crafted from 7075 aluminum sourced domestically. It's machined, anodized, and assembled in North Carolina. Featuring a 180 - degree clamp wrap secured by high - strength 316 stainless steel M5 bolts, it offers reliable performance. With a stack height of 40mm, it fits well on your bike. Keep in mind that there might be slight color variations in anodization between batches compared to the colors on our site. It weighs between 127 - 136g including the stainless steel bolts. Technical specs: steerer diameter is 1 - 1/8', bar diameter is 31.8mm, rise is +/- 5 deg, length is 50mm, and the color is pink.

Using this A318 stem is easy. First, make sure your bike's steerer tube diameter is 1 - 1/8' and the handlebar diameter is 31.8mm. Then, attach the stem to the steerer tube and handlebar using the high - strength 316 stainless steel M5 bolts. You can adjust the rise within +/- 5 degrees according to your riding preference. When it comes to maintenance, regularly check the bolts for tightness. If they seem loose, gently tighten them to keep the stem secure. Also, clean the stem with a mild soap and water solution to remove dirt and grime. Since there can be color variations between batches, don't be surprised if the actual color is slightly different from what you see on the site. And remember, this stem is made of high - quality 7075 aluminum, so it should last a long time with proper care.