A35 Stem (35.0) 32mm Bronze

This A35 stem is crafted from 7075 domestically sourced aluminum. It's machined, anodized, and assembled right in North Carolina. It features an 180 - degree clamp wrap secured by high - strength 316 stainless steel M5 bolts. The 32mm model has a stack height of 42mm, while the 40mm and 50mm models have a 40mm stack. Keep in mind that there might be color variations during anodization compared to the colors on our site. It weighs between 128 - 150g including the stainless steel bolts. You can customize the stem's look with colored faceplates using XN718* - 7191. Technical specs: 1 - 1/8' steerer diameter, 35.0mm bar diameter, +/-9 deg rise, 32mm length, and a bronze color.

Using your A35 stem is straightforward. First, make sure the steerer tube and handlebar match the stem's specifications. Attach the stem to the steerer tube using the provided high - strength 316 stainless steel M5 bolts, tightening them evenly. Then, connect the handlebar to the stem. When riding, avoid excessive force on the stem to prevent damage. As for maintenance, regularly check the tightness of the bolts. Clean the stem with a mild soap and water solution to remove dirt and grime. Since there can be color variations during anodization, don't be surprised if the actual color differs slightly from what you see on the site. Also, if you choose to use colored faceplates (XN718* - 7191), follow the instructions that come with them for a proper fit.