A35 Stem (35.0) 40mm Pink

This A35 stem is crafted from 7075 domestically sourced aluminum. It's machined, anodized, and assembled in North Carolina. It features an 180 - degree clamp wrap secured by high - strength 316 stainless steel M5 bolts. The 32mm model has a stack height of 42mm, while the 40mm and 50mm models have a 40mm stack. Note that there might be color variations during anodization compared to what you see on our site. It weighs between 128 - 150g including the stainless steel bolts. You can change the stem's look with colored faceplates using XN718* - 7191. Technical specs: 1 - 1/8' steerer diameter, 35.0mm bar diameter, +/-8 deg rise, 40mm length, and pink color.

Using this stem is easy. Just attach it to your bike following the standard bike stem installation process. Make sure the bolts are tightened properly, but don't over - tighten as it may damage the parts. When it comes to maintenance, regularly check the bolts for tightness, especially after long rides. Clean the stem with a mild soap and water solution, and dry it thoroughly to prevent rust, especially on the stainless steel bolts. Be aware that the color may vary slightly from batch to batch, so don't be surprised if the actual color is a bit different from what you see online.