A318 Stem (31.8) 30mm Lime

This A318 stem is crafted from 7075 domestically sourced aluminum. It's machined, anodized, and assembled in North Carolina. It features an 180 - degree clamp wrap secured by high - strength 316 stainless steel M5 bolts. With a stack height of 40mm, it's a reliable choice. Note that there may be color variations during anodization compared to the colors on our site. It weighs between 127 - 136g including the stainless steel bolts. Technical specs: steerer diameter is 1 - 1/8', bar diameter is 31.8mm, rise is +/- 8 deg, length is 30mm, and color is lime.

Using this A318 stem is easy. First, make sure your bike's steerer tube and handlebar match the stem's steerer diameter (1 - 1/8') and bar diameter (31.8mm). Install the stem onto the steerer tube and attach the handlebar to the stem, tightening the 316 stainless steel M5 bolts firmly. When riding, keep in mind that due to anodization, the color of your stem might vary slightly from what you saw on the site. For maintenance, regularly check the tightness of the bolts to ensure safety. Clean the stem with a mild soap and water solution, and dry it thoroughly to prevent corrosion. Store it in a dry place when not in use.