A35 Stem (35.0) 50mm Pink

This A35 stem is crafted from 7075 domestically sourced aluminum. It's machined, anodized, and assembled in North Carolina. It features an 180 - degree clamp wrap with high - strength 316 stainless steel M5 bolts. The 32mm model has a stack height of 42mm, while the 40mm and 50mm models have a 40mm stack height. Note that there may be color variations during anodization compared to the colors on our site. It weighs between 128 - 150g including stainless steel bolts. You can change the stem's look with colored faceplates using XN718* - 7191. Tech specs include a 1 - 1/8' steerer diameter, 35.0mm bar diameter, +/-7 deg rise, 50mm length, and a pink color.

Using your A35 stem is straightforward. First, make sure the steerer tube of your bike matches the 1 - 1/8' diameter of the stem. Attach the stem to the steerer tube using the high - strength 316 stainless steel M5 bolts. Tighten them evenly to ensure a secure fit. When installing the handlebar, which has a 35.0mm diameter, align it properly and tighten the relevant clamps. You can adjust the stem's angle within the +/-7 deg range according to your riding preference. As for maintenance, regularly check the tightness of the bolts to prevent any loosening during rides. Clean the stem with a mild soap and water solution to keep it looking good. Remember, due to anodization, there might be color differences between batches, but this won't affect the stem's performance.